World models voodoo 46

[Stangfreak2001]

I just started a brushless conversion on the world models voodoo 46. This is my first conversion. Im looking for SPEED (100+MPH....shooting for 125+) since its a Reno racer. Its 57.5" span ans should weight in around 6.5-7lbs. Want to run the Eflite power 52 motor, castle creations phoenix ice lite 100, and a 10x10-11x8 prop, on a 6s. What do y'all think of this set up? Any concerns? Tips? Any info is helpful......

[CNY_Dave]

If your experience level is low, make sure to video the maiden!

Otherwise, make sure we get a flyby after you get it dialed in.

[Stangfreak2001]

I've got plenty of flying experience ... mostly 3din' with extra 300's, or edge 540's. I've got the flying down pat, its the actual converting the nitro to electric part I've never done. I got the brains to make it work just not the knowledge to make it perform at its best. I've got the firewall forward built just need some tips on motor and prop selection and this whole power to watts thing... ... when in doubt just go bigger!..... btw ill be sure to get some good video and get it posted. It'll either be a fire ball or ridiculously fast!...