Motor typically used is 2814-06 (28mm by outside dia of bell, not the stator) with 6X4 prop.
About 300 to 325 watts on 3S 1800 mah. (one of the other guys did put a wattmeter on his)
I stuck a 2814-06 http://www.bphobbies.com/view.asp?id...7&pid=B1898545
(28mm by the stator) on one and no wattmeter reading but expect its pushing the motor's listed rating hard on 3S 1800mah with 8X4E APC.... and the motor is very cool. Roughly 3X the weight of the recommended motor. This one scoots really quick, but only flies about 5 min per charge.
Span is 37 in, length is 24 in.
Uses a triangle of appx 1/4 inch dowels to stiffen the wing.
REALLY cheap foam used to make it.
As I noted, I could work up plans in a couple of hours by taking measurements. Plotting all the LED holes would be the hard part.
I'm already recruiting for next year's airshow night flight team. Hoping to get 6 or 8 of them buzzing around at once.