What is a good 3D beginner airplane??

[DanFive0]

EPP profile foamy for sure...

Check out the Twisted Hobbys lineup, these are probably the most popular EPP foamys out there, and for good reason. These are some,badass foamys.

http://www.twistedhobbys.com/

[WayfaringDreamer]

Looks like HH has a winner with the new VisionAire: http://www.horizonhobby.com/products...nology-PKZ6580

[xmech2k]

A rainy day here, (A natural disaster in SOCAL!) so I finally started putting together my Tech One Swift.

Nitroplanes Tech One Swift

It was recommended by a few guys at the field and will be my first venture into 3d. We'll see if my fingers will be able to learn!

[Pilot Error]

Originally Posted by WayfaringDreamer

Looks like HH has a winner with the new VisionAire: http://www.horizonhobby.com/products...nology-PKZ6580

I'll be maidening mine in a day or so...

[stevecooper]

Originally Posted by Pilot Error

I'll be maidening mine in a day or so...

Love that new Plane!! QQ said I could fly his at SEFF this year,,, I can't wait to fly it but must wait till the price comes down to buy one, I'll introduce you to Him at SEFF this year if you would like me to, Great guy, The whole HH flying team are a Hoot to hang with, bubsteve

[stevecooper]

Originally Posted by xmech2k

A rainy day here, (A natural disaster in SOCAL!) so I finally started putting together my Tech One Swift.

Nitroplanes Tech One Swift

It was recommended by a few guys at the field and will be my first venture into 3d. We'll see if my fingers will be able to learn!

You'll do well with that,, I was blown away at the price and what comes with it, I taught a few to 3/D with a MS Unique that looks like near the same plane,,, Takes a heck of a lick'in and keeps on flying , good luck, bubsteve

[Pilot Error]

Originally Posted by stevecooper

Love that new Plane!! QQ said I could fly his at SEFF this year,,, I can't wait to fly it but must wait till the price comes down to buy one, I'll introduce you to Him at SEFF this year if you would like me to, Great guy, The whole HH flying team are a Hoot to hang with, bubsteve

Sweet! I can't wait to go hang out with other "electric" personalities...

[stevecooper]

Originally Posted by Pilot Error

Sweet! I can't wait to go hang out with other "electric" personalities...

I'm just a dumbThumbed Bum, Their the personalities, I just monitor their lipos sometimes when their practicing,,
back on topic the ultra micro 4-site & Edge 300 by E-flight can help starting out 3/D'in, I let everyone have a shot at it over 24' high grass,,
bubsteve

[gramps2161]

Originally Posted by DanFive0

EPP profile foamy for sure...

Check out the Twisted Hobbys lineup, these are probably the most popular EPP foamys out there, and for good reason. These are some,badass foamys.

http://www.twistedhobbys.com/

I just did the maiden flight with the 47" extra 330. First flight I had the rates dialed right down to sport flying expo was set around 48% flew great. Second battery I flipped to medium rates with the same expo started to really come alive. This is going to be one fun plane once I have it dialed in wind was picking up to 8 to 10 mph and it was not a issue. Looking forward to getting it trimmed out and CG where I want it on a calm day.
So here is another one to look at.
I think I will like this one better than my Acro Master.