Everybody out of stock on 2800 4 cell 30c batteries!!!

[iflyrc1012]

anybody got a source for 2700 mah 4 cell 30c batteries??? i need a couple for my Habu, T-28 and Meteor... the batteries can be a little bigger say 3000 mah, but the c rating has got to be at least 30c, and the price must be reasonable, I'm not paying $70 for a battery....all my regular sources have dried up or are getting out of hand price wise.....thanks in advance for any help guys.......

[pizzano]

Try this:

http://www.nitroplanes.com/98p-35c-2700-4s1p-4444.html

A little pricey, but they also have several 3000mah and 2600mah in stock, for a little less $$$.

[iflyrc1012]

pizzano,
thanks for the link, but i don't use gens ace batteries. i had three at the beginning of last summer and all 3 are puffed beyond the point of being useful in airplanes.i think the c ratings are over-rated by half at least...
i still use them for my r/c truck and for led lights in my e-z up during nightflying sessions... if they totally fail in the truck or in the lights, no big deal.....

[BBCorvette18]

http://www.hobbyking.com/hobbyking/s...arehouse_.html

[iflyrc1012]

thanks B.B.
they were out of stock last time i looked!!! i looked at chinaline hobby, good price, but i'm a bit worried about ordering from them....

[BBCorvette18]

Thats the us warehouse i dont know where your located. But if you are in the us hobby king had a few different options you could get. They seem to keep pretty good stock on batteries.

[fhhuber]

http://www.nitroplanes.com/77p-sl300...-40c-4444.html

Having to go to the 40C because 30C out of stock... Didn't look at their Sky LiPo 20c or 25c today, but I wouldn't be afraid to use them.

I've been pushing 105 amps through a few sets of 4400 mah 20c Sky LiPos (3 X 4S or 4 X 3S for 12S) for almost 4 years now with no cell failures. Still getting 5000 watts by wattmeter from my BVM EVF with the oldest of these packs. (I ordered more every year) No sign of losing ability to deliver current.
I did find a bad solder joint at a 4 mm connector by having it melt off. Soldered it back and its fine.

[bob2005]

Try here: http://www.bphobbies.com/view.asp?id=A3087690 Bob