Hobby Lobby Crash Sale (only on Wed)

[aviatordave]

3D flat foam Shockflyer for extreme aerobatics!

26-3/4" wingspan, 24-1/2" long, 267 sq. in. wing area, 8 oz. flying weight. All pre-cut foam, pre-printed on both sides. Instructions are illustrated step-by-step making assembly quick. Hinge tape, glue, carbon reinforcements, landing gear and pushrods included. Model is very light and responds instantly to your commands. All 3D maneuvers are easily accomplished, the model will perform as wildly as your abilities allow. With reduced throw on the control surfaces the model is docile enough for learning aerobatics and 3D. Flight times are from 7-15 minutes. For 4 channels: Aileron, Elevator, Rudder and Throttle.

<table cellpadding="5" cellspacing="0" width="100%"><tbody><tr><td valign="top" width="100%">

<hr width="100%">

</td> </tr> <tr> <td valign="top">
</td></tr></tbody></table>

<hr width="100%">
IK101399 Ikarus Pitts Special Shockflyer Biplane with Motor, Gearbox, Prop ..... $62.35
CRASH SALE! ..... $ 29.90 - You SAVE $32.45!

[brocja01]

I just ordered mine, anyone have any experience with this model. Looks quite fun, and for 30 bucks, hard to turn it down.

[gfdengine204]

Originally Posted by aviatordave

3D flat foam Shockflyer for extreme aerobatics!

26-3/4" wingspan, 24-1/2" long, 267 sq. in. wing area, 8 oz. flying weight. All pre-cut foam, pre-printed on both sides. Instructions are illustrated step-by-step making assembly quick. Hinge tape, glue, carbon reinforcements, landing gear and pushrods included. Model is very light and responds instantly to your commands. All 3D maneuvers are easily accomplished, the model will perform as wildly as your abilities allow. With reduced throw on the control surfaces the model is docile enough for learning aerobatics and 3D. Flight times are from 7-15 minutes. For 4 channels: Aileron, Elevator, Rudder and Throttle.

<table cellpadding="5" cellspacing="0" width="100%"><tbody><tr><td valign="top" width="100%">

<hr width="100%">

</td> </tr> <tr> <td valign="top">
</td></tr></tbody></table>

<hr width="100%">
IK101399 Ikarus Pitts Special Shockflyer Biplane with Motor, Gearbox, Prop ..... $62.35
CRASH SALE! ..... $ 29.90 - You SAVE $32.45!

So, Dave, didja order one?

I just did.

[aviatordave]

No....I got enough 3D foamies here. I need to crash more and thin out the herd.


Actually if I could just fly outside it might happen.

[gfdengine204]

Originally Posted by aviatordave

No....I got enough 3D foamies here. I need to crash more and thin out the herd.


Actually if I could just fly outside it might happen.

Maybe you should be planning ahead, then?

[Fly Time]

Hey guys, I got one of these too, just before they sold out. It will be my first flat foamy.

I wish H-L provided a little more info about what I'll need to complete it. They could have sold me more stuff if they did, but now I'll just wait until it arrives to see for myself.

[aviatordave]

Originally Posted by gfdengine204

Maybe you should be planning ahead, then?

I'd like to..but one thing keeps holding me back....


its the

WIFE ()

[aviatordave]

Originally Posted by Fly Time

Hey guys, I got one of these too, just before they sold out. It will be my first flat foamy.

I wish H-L provided a little more info about what I'll need to complete it. They could have sold me more stuff if they did, but now I'll just wait until it arrives to see for myself.

I'd scrap the brushed motor and put on a BL set up with 12+oz's of thrust.

I think they provide all the linkages, you just need batt. - servos - rx

[gfdengine204]

Originally Posted by aviatordave

I'd like to..but one thing keeps holding me back....


its the

WIFE ()

I, uh, just bought it and didn't say anything......I am sure I will hear about it later.

Originally Posted by aviatordave

I'd scrap the brushed motor and put on a BL set up with 12+oz's of thrust.

I think they provide all the linkages, you just need batt. - servos - rx

What's wrong with the brushed setup? I will prolly use it til it dies, then swap it out for a BL. Then I can learn the plane on a more sedate setup, and get real comfy with it.

Did the same with the Reflection Bipe (now if I could just get some weather to fly it in....). Maybe we should get together and you can fly your RCU bipe and me my Reflection next time I come out that way for camping.

[Fly Time]

Originally Posted by aviatordave

I'd scrap the brushed motor and put on a BL set up with 12+oz's of thrust.

I think they provide all the linkages, you just need batt. - servos - rx

Yeah, I was already thinking about going in that direction. I'm assuming it doesn't come with an ESC for the brushed motor, which would set me back about as much as a brushless motor and ESC combo from Heads Up. Most everything else I should already have in my spare parts box.

[buzkil]

I got one too!! I got the "Wife" to order it as soon as it went on sale. I already have a brushed 30AMP ESC lying around. I also have a couple of 1300mha 3cell lipos too with JST connectors that aren't even C rated. If they aren't too heavy for the plane they might just do the job. Then all I would need are some cheap light weight servos. I also have an electron 6 reicever that I could pull the case off of and lighten. I'll just have to wait and see if I can use any of it when the plane comes in. This too will be my first profile foamy.

And here is the sight to find tech data in http://www.ikarus-modellbau.de/onlin...=265&anid=5889

[FlyingMonkey]

RC Flight Simulators

NEW! easyFLY2 USB Interface Version or with Game Commander

Based on the unique flight physics of the Aerofly Professional Deluxe RC Flight SIM, the easyFLY2 is one of the best and most realistic RC flight simulators. From 3D aerobatics with fixed wing and helicopter models to the realistic simulation of stall characteristics and collision detection in sceneries, everything is extremely accurate. The adjustable wind parameters, such as direction, intensity, turbulence and thermals will enable you to practice with all models under varying conditions. All models have movable components such as ailerons, elevator, rudder, flaps and detailed retracts. Even exhaust and smoke are simulated correctly. You will feel like you are at your own flying field when flying in the high resolution photographic scenery. The degree of realism is astounding and you may easily forget that you are flying a simulator. The highly detailed 3D scenery is ideal for practicing in follow and cockpit mode. Thanks to the modern USB technology, the easyFLY2 has plug and play installation.

NEW! easyFLY2 Game Commander Version
easyFLY2 with USB Game Commander controller has exactly the same specs as above, but comes with a Game Commander "RC Transmitter".


IK3011001 Ikarus easyFLY2 RC Flight SIM USB Interface Version for Hitec, older Futaba, and Airtronics ..... $99.95 CRASH SALE! ..... $ 49.00 - You SAVE $50.95

IK3011004 Ikarus easyFLY2 RC Flight SIM USB Interface Version for JR, Spektrum, and newer Futaba ..... $99.95 CRASH SALE! ..... $ 49.00 - You SAVE $50.95

IK3011002 Ikarus easyFLY2 RC Flight SIM with USB Game Commander ..... $129.95 CRASH SALE! ..... $ 64.00 - You SAVE $65.95


Only Good While Supplies Last
Sale begins at 8:00 AM CST, Wednesday 3/12/08!!!

[idealhobbies]

That's tomorrows crash sale Monkey?

[FlyingMonkey]

that's what I got in the email tonight.


That's a pretty good set of deals, if you ask me.

[aviatordave]

I didnt see any crash sale emails......are they going to have one tomorrow?

[Liquidity]

I only got an email about March madness and 20% off 1 item.

[Ribcracker]

Me too. So that must be it.

[Airhead]

I haven't received anything...

[aviatordave]

How dare they toy with our emotions.....

[Fly Time]

My Crash Sale Pitts arrived a few days ago. Looks like it will be a fun plane to fly!

I haven't decided on a motor yet. I'm debating between an el-cheapo outrunner, or sticking a little inrunner on the gearbox that came with the included brushed motor. Any ideas on that? I'm also wondering about thrust angle. It doesn't look like any is built into the motor mount. I will probably be using glue to mount the motor, so won't have much of an opportunity to adjust it later.

Meanwhile, I ordered an $18 GWS Rx and a pair of 900 mAh 2 cell lipos for $21 on eBay. By using some salvaged servos, I should be able to get this one in the air for under $100 including the batteries, even after upgrading the motor

[aviatordave]

The gearbox route would work, but if you think your going to be hitting the ground a few times I'd go with an outrunner. I think I just put a couple degrees of right thrust in.

[Fly Time]

Originally Posted by aviatordave

The gearbox route would work, but if you think your going to be hitting the ground a few times I'd go with an outrunner. I think I just put a couple degrees of right thrust in.

I went ahead and ordered an outrunner. I love inrunners, but they are more expensive plus I'm never exactly sure how to match kv, gear reduction and prop size.

[aviatordave]

They dont say what the items are, but there is a sale tomorrow -

6 CRASH Items On Sale!!

We have more CRASH items on sale than ever before ...
Too many to list in this email!

• Quantities are limited so some of these items will go fast.
• Big Planes, Tiny Planes, Beginner Planes, Radio Systems, Simulators and more!

Sale begins at 8:00 AM CST, Wednesday 3/26/08!!!

[aviatordave]

<TABLE cellSpacing=0 cellPadding=2 width=762 align=center border=0><TBODY><TR><TD vAlign=top width="100%"><TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD width="100%">

Ikarus Nova 6 Plus Radio Set

</TD></TR><TR><TD bgColor=#d7d7d7>

NEW! 6 channel 72 MHz Transmitter and Receiver without servos

</TD></TR><TR><TD>

<TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width=408>

</TD><TD width=320>

Ikarus Nova 6 Radio Set - 72 MHz, FM, FCC approved system with 6 channel transmitter and transmitter crystal, 6 channel micro receiver and receiver crystal. Transmitter has manual trims and servo reversing on channels 1-4, travel volume adjustment on channels 1, 2 and 4. Also has built-in V-tail and Elevon mixing option. Channel 5 (retractable gear) is a two-position switch (on/off), Channel 6 (Flaps) is a three-position switch. Transmitter has a soft, slip-resistant surface for a secure grip, and uses 8-AA batteries (not included).

</TD></TR></TBODY></TABLE>

</TD></TR><TR><TD align=middle><FORM action=/cgi-bin/basket.pl/hobbylobby?basket.html method=post>

IK177221 Ikarus Nova 6 Plus Radio Set (Tx, Rx and Crystals) ..... $69.95
CRASH SALE! ..... $ 39.95
<INPUT id=c_IK177221 size=2 value=1 name=c_IK177221> <INPUT type=submit value="Add IK177221 to Cart"> AVAILABLE NOW

</FORM></TD></TR></TBODY></TABLE></TD></TR><TR><TD><HR width="100%" color=#0000ff></TD></TR><TR><TD vAlign=top><TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD width="100%">

Fliton Extra 330 Free Style

</TD></TR><TR><TD bgColor=#d7d7d7>

Its light weight makes for startling performance

</TD></TR><TR><TD>

<TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width=476>

</TD><TD width=252>

Fliton Extra 330 Free Style - 59-3/4" wingspan, 57-1/4" long, 6-1/2 pound flying weight. Airplane is a precision aerobatic performer; point rolls, knife-edges, snaps and rolls are performed with ease. 3D flight, hovering, torque rolls, and waterfalls are all possible. Pre-built all wood construction, comes pre-covered and decorated with quality heat shrink film. Wings, elevator and rudder are all fully symmetrical airfoils with the hinges pre-slotted for quick, accurate construction. Cowl and wheel pants are pre-finished fiberglass. Landing gear is pre-finished aluminum. For 4 channels: Aileron (2 servos), Elevator, Rudder and Throttle.

</TD></TR></TBODY></TABLE>

</TD></TR><TR><TD><TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD>

</TD><TD>

</TD></TR></TBODY></TABLE></TD></TR><TR><TD><TABLE borderColor=#d7d7d7 cellSpacing=0 cellPadding=2 width=460 align=center border=1><TBODY><TR bgColor=#d7d7d7><TD colSpan=2>

Online Video Clips -- See Extra 330 FLY!

</TD></TR><TR borderColor=#d7d7d7><TD width=228>

1.8 MB

</TD><TD width=218>

2.1 MB

</TD></TR></TBODY></TABLE></TD></TR><TR><TD align=middle><FORM action=/cgi-bin/basket.pl/hobbylobby?basket.html method=post>

FLIT330 Fliton Extra 330 Free Style 3D/Pattern Plane ..... $205.00
CRASH SALE! ..... $ 169.00
<INPUT id=c__FLIT330 size=2 value=1 name=c__FLIT330> <INPUT type=submit value="Add FLIT330 to Cart"> AVAILABLE NOW

</FORM></TD></TR></TBODY></TABLE></TD></TR><TR><TD><HR width="100%" color=#0000ff></TD></TR><TR><TD vAlign=top><TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD>

"Tiny Tiger Moth" Scale RC Airplane

</TD></TR><TR><TD bgColor=#d7d7d7>

Tiny 26.5" wingspan scale model -- a real gem

</TD></TR><TR><TD>

<TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width=476>

</TD><TD width=252>

Tiny Tiger Moth - 26-1/2" wingspan, 20" long, 8-1/2 oz. flying weight. Lots of wing area on this small bi-plane, combined with its light weight you have a model that flies beautifully. Take a close look at the parts photo; the detail is amazing for a model of this size. The complex wire landing gear is completely built and the struts are covered. All the rigging is included, the elevator and rudder are pull-pull and the ailerons are full span on the lower wing. Most of the assembly is with screws, there is very little that requires gluing. Flight times are 6-8 minutes. For 4 channels: Aileron, Elevator, Rudder and Throttle.

</TD></TR></TBODY></TABLE>

</TD></TR><TR><TD><TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD>

</TD><TD>

</TD></TR></TBODY></TABLE></TD></TR><TR><TD><TABLE borderColor=#d7d7d7 cellSpacing=0 cellPadding=2 width=460 align=center border=1><TBODY><TR bgColor=#d7d7d7><TD colSpan=2>

Online Video Clips -- See Tiny Tiger Moth FLY!

</TD></TR><TR><TD width="50%">

1.3 MB

</TD><TD width="50%">

1.5 MB

</TD></TR></TBODY></TABLE></TD></TR><TR><TD><FORM action=/cgi-bin/basket.pl/hobbylobby?basket.html method=post>RCM186 Green RC Tiny Tiger Moth Scale Electric RC Plane ..... $65.90
CRASH SALE! ..... $ 45.90
<INPUT id=c__RCM186 size=2 value=1 name=c__RCM186> <INPUT type=submit value="Add RCM186 to Cart"> AVAILABLE NOW </FORM></TD></TR></TBODY></TABLE></TD></TR><TR><TD><HR width="100%" color=#0000ff></TD></TR><TR><TD><TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD width="100%">

Electro UHU ARF Airplane

</TD></TR><TR><TD bgColor=#d7d7d7>

Great beginner airplane - easy to build, easy to fly

</TD></TR><TR><TD>

<TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width=476>

</TD><TD width=252>

Electro UHU ARF - 47-1/4" wingspan, 36-1/4" long, 17 oz. flying weight. Highly pre-fabricated of tough "SOLIDPOR" foam, an EPP-like product that glues with regular CA glue. All parts are keyed together and the assembly takes only hours. The clearly illustrated instructions assure that even a first time builder will be successful. Easy to hand launch, just a light toss and you are flying. The airplane has a single main wheel in the fuselage and two tiny wheels under the wing. Landings, touch and goes, even take offs from a smooth runway are possible. For 3-Channels: Rudder, Elevator and Throttle.

</TD></TR></TBODY></TABLE>

</TD></TR><TR><TD><TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD>

</TD><TD>

</TD></TR></TBODY></TABLE></TD></TR><TR><TD align=middle><TABLE borderColor=#d7d7d7 cellSpacing=0 cellPadding=2 width=460 align=center border=1><TBODY><TR bgColor=#d7d7d7><TD colSpan=2>

Online Video Clips -- See Electro UHU FLY!

</TD></TR><TR><TD width="50%">

1.7 MB

</TD><TD width="50%">

1.9 MB

</TD></TR></TBODY></TABLE></TD></TR><TR><TD align=middle><FORM action=/cgi-bin/basket.pl/hobbylobby?basket.html method=post>

GR9400 Graupner Electro UHU ARF Electric Airplane ..... $98.50
CRASH SALE! ..... $ 64.50
<INPUT id=c__GR9400 size=2 value=1 name=c__GR9400> <INPUT type=submit value="Add GR9400 to Cart"> AVAILABLE NOW

</FORM></TD></TR></TBODY></TABLE></TD></TR><TR><TD><HR width="100%" color=#0000ff></TD></TR><TR><TD><TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD width="100%">

Sea Fury "Furias" ARF

</TD></TR><TR><TD bgColor=#d7d7d7>

Flies better electrically - includes retracts and flaps

</TD></TR><TR><TD>

<TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width=476>

</TD><TD width=252>

Sea Fury "Furias" ARF - 65-1/2" wingspan, 56-1/4" long, 13-1/2 pound flying weight. Conventional all wood construction, laser cut, expertly built and pre-covered. Engine cowl is pre-finished fiberglass. Wings are in three sections. Use the flaps for easy take offs and landings. Speeds in the 80-100 MPH range are typical. The large ailerons make the roll rate blindingly fast. Rolls are axial and loops are huge. Can be flown off of paved runway or grass. Photo illustrated instructions speed you through the assembly. 6 channel radio required; Ailerons (2 servos), Flaps (2 servos), Elevator (2 servos), Rudder, Retracts and Throttle.

</TD></TR></TBODY></TABLE>

</TD></TR><TR><TD><TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD>

</TD><TD>

</TD></TR></TBODY></TABLE></TD></TR><TR><TD align=middle><TABLE borderColor=#d7d7d7 cellSpacing=0 cellPadding=2 width=460 align=center border=1><TBODY><TR bgColor=#d7d7d7><TD colSpan=2>

Online Video Clips -- See Sea Fury FLY!

</TD></TR><TR><TD width="50%">

1.7 MB

</TD><TD width="50%">

2 MB

</TD></TR></TBODY></TABLE></TD></TR><TR><TD align=middle><FORM action=/cgi-bin/basket.pl/hobbylobby?basket.html method=post>

GR9389 Graupner Sea Fury "Furias" ARF Electric Plane ..... $383.70
CRASH SALE! ..... $ 249.00
<INPUT id=c__GR9389 size=2 value=1 name=c__GR9389> <INPUT type=submit value="Add GR9389 to Cart"> AVAILABLE NOW

</FORM></TD></TR></TBODY></TABLE></TD><TR><TD><HR width="100%" color=#0000ff></TD></TR><TR><TD vAlign=top><TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD width="100%">

RC Flight Simulator

</TD></TR><TR><TD bgColor=#d7d7d7>

NEW! easyFLY2 USB Interface Version or with Game Commander

</TD></TR><TR><TD>

<TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width=362>

</TD><TD width=366>

</TD></TR><TR><TD colSpan=2>easyFLY2 Photo Realistic RC Flight Simulator - Based on the unique flight physics of the Aerofly Professional Deluxe RC Flight SIM, the easyFLY2 is one of the best and most realistic RC flight simulators. From 3D aerobatics with fixed wing and helicopter models to the realistic simulation of stall characteristics and collision detection in sceneries, everything is extremely accurate. The adjustable wind parameters, such as direction, intensity, turbulence and thermals will enable you to practice with all models under varying conditions. All models have movable components such as ailerons, elevator, rudder, flaps and detailed retracts. Even exhaust and smoke are simulated correctly. You will feel like you are at your own flying field when flying in the high resolution photographic scenery. The degree of realism is astounding and you may easily forget that you are flying a simulator. The highly detailed 3D scenery is ideal for practicing in follow and cockpit mode. Thanks to the modern USB technology, the easyFLY2 has plug and play installation.
<TABLE width=650 align=center border=0><TBODY><TR><TD>

</TD><TD>

</TD><TD>

</TD></TR><TR><TD>

</TD><TD>

</TD><TD>

</TD></TR></TBODY></TABLE>easyFLY2 has:

• 9 models, 5 airplanes and 4 helicopters: Edge 540 3D, F-22 Jet, PT-40 Trainer, LS-8 sailplane and a 3D Shock Flyer. Helicopters are: Sikorsky CH-53, Ikarus ECO 7 and Piccolo V2, and the Millennium 3D.
• 3 Sceneries: Marxzell airport (photographic outdoor scenery), Golf dome (photographic indoor scenery), Hawaii (3D island scenery with four different runways)
• Adjustable point of view in 3D scenery
• Follow and cockpit mode with instrument display in 3D scenery
• Adjustable wind force and direction, thermals and turbulence
• Back lighting effects
• Glider sound
• Autorotation training with helicopters
• 3D sound simulation 3D torque roll practicing
• Fog and smoke simulation
• Mirror effect on reflecting model components

Specs, system requirments, and more info
</TD></TR></TBODY></TABLE>

</TD></TR><TR><TD><TABLE width="100%" border=0><TBODY><TR><TD>

</TD><TD>

</TD><TD>

</TD></TR></TBODY></TABLE></TD></TR><TR><TD align=middle><FORM action=/cgi-bin/basket.pl/hobbylobby?basket.html method=post>

IK3011001 Ikarus easyFLY2 RC Flight SIM USB Interface Version for Hitec, older Futaba, and some Airtronics ..... $99.95
CRASH SALE! ..... $ 49.00 - You SAVE $50.95
<INPUT id=c__IK3011001 size=2 value=1 name=c__IK3011001> <INPUT type=submit value="Add IK3011001 to Cart"> AVAILABLE NOW

</FORM></TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>

[FlyingMonkey]

I was excited about the sale, why?


blah!