All sold, thanks!
1x D1811 2000Kv "10gram" brushless outrunner
1x Pentium 6 Amp ESC
3x pairs of male and female 2mm gold bullet connectors.
1x pair of micro polarized deans (the knockoff version)
2mm heat shrink tubing for all connectors.
The total weight of the above setup is around 20-22grams (~0.7-0.77oz) depending on your choice of prop adapter.
I am willing to solder all the connectors and put on the heat shrink tubing for you if you would like. If you want to do all the soldering and heat shrinking yourself, that is alright too. Just let me know how you would prefer it.
If you choose to have me solder the connectors for you, I am also willing to spin the motor up to make sure it works like it should.
The motor comes with a prop-saver adapter and a collet-type prop adapter. I have used the same motors with the same ESCs, a 2S 500mAh Lipo and a GWS 7x3.5 prop in a few planes with great success. The GWS 7x3.5 prop has worked well for me but the motor can get quite warm if you are too heavy on the throttle for extended periods. I measured around 135grams of thrust with a fresh battery on the previously mentioned setup.
are a few threads related to this motor.
shipped to Continental United States.
Please feel free to send me a PM with any questions.
Thanks for looking,