For Sale Pilot-1 PA-12 1/8 Scale ARF SOLD

[1987tc]

Box is ugly but model is in great shape. Still in plastic bags inside box.
Took out of box to inspect it. Then put it back in.
Nothing touched other then that.
Below will be information from Hobby Lobby's site:





53-1/4" wingspan, 39-1/2" long, 360 sq. in. wing area, 34 oz. flying weight. The baby brother to our 1/4 scale PA-12, one half the size but retains the fun and great scale looks. All laser cut balsa and plywood construction, pre-built and pre-decorated, can be assembled and ready-to-fly in a matter of hours.



Covered in genuine Oracover for great looks now and in the future. Step-by-step photo illustrated instructions will guide even the relative novice through the build process to a successful conclusion.



While not suitable for the complete novice, the little PA-12 is a very easy to fly airplane. It does not exhibit any bad tendencies and is totally predictable in flight performance. Flight times of 15 minutes plus are the norm. While not an aerobatic airplane, the PA-12 is capable of loops and rolls and inverted flight (not something you would try in a full scale one).



Includes pre-bent and assembled landing gear, fiberglass cowl, steerable tail wheel, windshield and side glass, wing struts, wheels and hardware pack. For 4-channels: Ailerons (2 channels), Elevator, Rudder and Throttle. A radio with end point, exponential, and rudder mixing is recommended.
























Length: 38-1/2"Wingspan: 53-1/4"Flying Weight: 34 oz.Controls: Ailerons (2 servos), Elevator, Rudder, ThrottleWing Area: 360 sq. in.
Radio

1 - SPM5500 DX5e Full Range Transmitter, AR500 Receiver, no servos

4 - HTS055 Hitec HS-55 Servos

2 - HT0097 Hitec 12" Aileron Extensions



Motor/Prop

1 - ERCBL480 480 Size Brushless Outrunner 900Kv

1 - P09060SF 9x6 APC Slowflyer Prop



Motor Controller

1 - JAP18 Jeti Advance Pro 18 Amp Brushless Controller

1 - JAP01 Jeti Advance Pro Program Card * optional



Battery

1 - YTB21003 3 Cell 11.1V 2100 mAh 20C LiPo



Charger

1 - SRC403 40 Watts Balance Charger for 1-4 Lithium Cells



Accessories

Includes: Glue, Solder, Connectors, etc.



I would consider trade for other planes. I am not into 3d at all.
But like general sport flying with scale type aerobatics.

$118.00 shipped in 48 states.

paypal please.

[1987tc]

Looks like I will be at the Rose Bowl ( Tulsa)for the fly in and swap meet after all.
Will have this and some other planes for sale.



Battery hatch.





Instruction manual.

[1987tc]

Ended up not taking my airplanes for sale in. So they are all still available.
Wes

[1987tc]

Now on Ebay. No reserve!