Vintage R/C plans

[pd1]

The Beechcraft C-45 is the military version of the Beech 18.

Cessna 310 early version but with a few changes cn be made to look like a newer version

Dehavilland made some nice twin engine planes.

[pd1]

Douglas DC 3
Gemini civilian twin
Piper twins, the PA 23 Apache and the PA 31 Navajo

[pd1]

Stinson Tri motors and the beautiful Lockheed Constellation

[pd1]

The Widgeon plan I redid, I also have it enlarged to 50 inch WS.
The Viking is a nice small twin too.

[Turbojoe]

Holy cow! Thanks Paul! Gotta go to work now but will look through these when I get home.

Joe

[pd1]

Here's another Grumman. Al Williams Gulfhawk II

[road king 97]

Originally Posted by pd1

The Widgeon plan I redid, I also have it enlarged to 50 inch WS.
The Viking is a nice small twin too.

First ya real me in with a couple warbirds then you yank and set the hook with a seaplane plan .You know i have a weakness for the water flying lmao Thanks for the great plans Paul .joe

[pd1]

I wanted to build this one. The plans I did in the past, well they weren't too good, so I redrew the plan.
My dad had this one back in the early 50's. I ended up with it in the early 60's. Time for a new one.

[pd1]

I scanned these plans a while ago. Since I've learned how to shrink the files small enough for here, I dug them out.

I couldn't stop until I cleaned them up a bit more.
These could even be made out of depron.

Albatross D 5A
BE 2
SE-5
Fokker D VII
Nieuport 12C
Sopwith Camel

[pd1]

This is a plane from the late 60's. meant to be an aerobatic and aileron trainer.
It is a take off of the original H Ray, was even supposed to replace the H Ray. It didn't. H Ray kept selling well.

I just bought a kit at an auction last week end. Now I have one.
Funny thing is... I was working at the factory and wrote some of the instructions on how to build it. This will be my first time building an A Ray.

[Dimeflyer]

More plans please I am still as hocked on the plans as building the planes !!!!!!!
George

[pd1]

Originally Posted by Dimeflyer

More plans please I am still as hocked on the plans as building the planes !!!!!!!
George

Here's another one.
Klemm L25d made by Krick.

[Turner]

Never seen the Klemm before. Beautiful plane.

[pd1]

During WW II a designer working at Lockheed designed an airplane for the post war civilian market. That plane was the Little Dipper.

When that market didn't develop, they tried selling the plane to the military as a one man air Calvary plane. they called it the Sky trooper.

The military didn't bite. So the designer, John Thorpe, left Lockheed and re designed the plane. He widened it for twp people and called it the T-11 Sky Scooter.
Then the engine size was increased and the plane became the T-111, a few more changes and it became the T- 211.

Didn't sell well so he went to Piper aircraft and it was redesigned to become the PA-28. Known as the Piper Cherokee, one of the most popular and most produced light planes ever.

[Dimeflyer]

Gee guys thank you all for the plans and your time to post them all !!
George

[pd1]

Here's a real nice plan for a WW I SE-5A
By Scalemasters.
I redrew the wing and stab and a general clean up too.
The plan has a second sheet loaded with scale details.

[pd1]

And one for the jet guys.
Berkeley Douglas Skyray.

[Dimeflyer]

Thank you to many PD1 I like that SE5 plan to much !!
George

[pd1]

Aeromaster. Here's another one from Lou Andrews and AAmco.

[Turbojoe]

Many thanks again for all of your plan posts Paul. While few of us will ever get to many of the builds it sure is great to have this awesome selection to choose from!

Joe

[pd1]

After the Aeromaster was made, Ernie Huber made a single wing for the Aero fuse. It flew fine. Lou stretched the fuselage and made a new wing and we have the Sportmaster.

I built the first one from production parts, two actually, one for me and one for Lou.

[Mooney_Driver]

Originally Posted by pd1

PT-17

Do you happen to have any PT19 plans?

[pd1]

Originally Posted by Mooney_Driver

So you happen to have any PT19 plans?

Small Sterling PT-19 20 inch
Large Sterling PT-19

Jetco/ Hollinger PT-19 72 inch
Comet 10 inch PT 19

Pilot PT-19
Earl Stahl PT-19

[Dimeflyer]

Wow I thought I had all those plans before but now I know I do -Thank you vrry much !!
George

[Mooney_Driver]

Originally Posted by pd1

Small Sterling PT-19 20 inch
Large Sterling PT-19

Jetco/ Hollinger PT-19 72 inch
Comet 10 inch PT 19

Pilot PT-19
Earl Stahl PT-19

Those are great. Thank you.