WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   Hobby Express discussion (https://www.wattflyer.com/forums/forumdisplay.php?f=216)
-   -   Hobby-Lobby F4 Phantom Camo (https://www.wattflyer.com/forums/showthread.php?t=44298)

Flyboone 02-26-2009 04:13 PM

Hobby-Lobby F4 Phantom Camo
 
http://www.hobby-lobby.com/images_te...es/fms003c.jpg

FMS003C F4 Phantom Camo ARF
FMS003CE F4 Phantom Camo Airfram Only


BIG Camo F-4 Phantom with 70mm fan, Outrunner motor, and 4S lipo pack included
28-3/8" wingspan, 43-3/8" length, 250 sq. in. wing area, 34 oz. flying weight. This all-molded foam airplane comes completely painted in an attractive matte finish with waterslide decals applied. The 70mm fan with brushless outrunner motor is pre-installed, as is the 45A brushless speed control. The jet has 5 pre-installed servos: (2) ailerons, (2) elevators, nose wheel steering. Landing gear is fixed but can be easily removed for hand launching. Battery changes are quick, just remove the canopy that is held in place with magnets. The jet is large enough for good visibility in flight, but is easily transported. The thrust from the 70mm fan with the included 4 cell 2100 mAh LiPo battery will quickly accelerate the F-4 into the air. The climbout is steep and the speed impressive. The full scale Phantom had the glide angle of a brick; our version displays much more pilot friendly manners. Due to its light weight the F-4 will slow down nicely and retain its good flying character, making landings a thing of beauty. Flight times are about 5 minutes on a charge. Requires a 4 channel radio.

For more information click HERE

Use this thread to discuss any and all things related to F4 Phantom Camo


All times are GMT +1. The time now is 11:54 PM.

Powered by: vBulletin
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.06938 seconds with 8 queries