WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   Power Systems (https://www.wattflyer.com/forums/forumdisplay.php?f=17)
-   -   ElectriFly Rimfire 1.60 Jerk Start (https://www.wattflyer.com/forums/showthread.php?t=80917)

evansh 08-08-2020 03:49 AM

ElectriFly Rimfire 1.60 Jerk Start
 
I have a Rimfire 1.60 with SS 60A ESC operating on 12s. It is OK except the motor doesn't move until throttle is opened 3 clicks. Then it
suddenly and violently starts. The combo works in a 60 inch Pitts but is a nightmare trying to land as no fine throttle control at bottom end.
I have calibrated the ESC with throttle movement and checked it is 100% and no curve. Also checked ESC and it is on default settings. Any suggestions re problem or what I should do. Thanks

MustangMan 08-08-2020 05:35 PM

I would suggest contacting the manufacturer. Some ESC's have a "soft start" setting, though there's no mention of such an option in the SS-60/80 manual that I found online.

evansh 08-09-2020 01:34 AM

Thank you sir, will do as advised.


All times are GMT +1. The time now is 09:54 AM.

Powered by: vBulletin
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright © 2022 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.05832 seconds with 8 queries