WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   Delta & Flying Wings (https://www.wattflyer.com/forums/forumdisplay.php?f=8)
-   -   Programming help please. (https://www.wattflyer.com/forums/showthread.php?t=80993)

BMims 09-08-2020 08:07 PM

Programming help please.
 
Hiya folks, I'm coming back into flying, working with wings, since I can't see gliders at a distance anymore (getting older sucks). I'm currently overseas in Kuwait, and have picked up a JR T6x4. I'm rusty AF on programming, and can't get both elevon servos to work with aileron throws.

Oh, and for the REALLY old goats around here...I'm Twizter68...can't remember my password, and that email is no longer active.

Cheersw from Kuwait!
Bill

crxmanpat 09-08-2020 08:35 PM

Hey Bill, long time no see! Hope things are going well for you.

When setting up the model in the radio, you should come across a setting asking for Wing Type. For a flying wing (or any delta wing plane), use the Delta setting. This will make the servos act as ailerons and elevators. I hope that's what you were asking.

BMims 09-09-2020 05:25 AM


Originally Posted by crxmanpat (Post 1025769)
Hey Bill, long time no see! Hope things are going well for you.

When setting up the model in the radio, you should come across a setting asking for Wing Type. For a flying wing (or any delta wing plane), use the Delta setting. This will make the servos act as ailerons and elevators. I hope that's what you were asking.

Hiya Pat, how ya been?

Yeah I set up under the delta, but the left aileron still only works on elevator input.
Going to play with the mixes a bit.

crxmanpat 09-09-2020 06:11 AM

So one thing I learned about delta and JR radios. You need to switch the servo plugs into the RX and/or reverse the switches in the radio. There was a combination that you had to get exactly right for everything to work properly. Been so long I've forgotten what it is. Try that first before messing with the mixes. Do the servo plugs first, then do the reverse switch.


All times are GMT +1. The time now is 02:58 PM.

Powered by: vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.07733 seconds with 9 queries