WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   RC Radios, Transmitters, Receivers, Servos, gyros (https://www.wattflyer.com/forums/forumdisplay.php?f=68)
-   -   Is my FrSky DFT module dead? (https://www.wattflyer.com/forums/showthread.php?t=79860)

Ultracon 02-24-2019 06:55 AM

Is my FrSky DFT module dead?
 
I have a FrSky DFT module that has worked flawlessly in the past. It's only a year old. However, the other night I tried to bind and I got no beep or led light on the module. Is the module dead, or is there a solution? I fully charged the battery in the Tx but that didn't help. I couldn't find anything loose or corroded in the module or the Tx, which is a Hitec Prism 7, I took the module out and I looked at the module pins in the Tx module bay, and I'm getting a good 11.7v - 12v from the Lipo that is in there. In the DFT module I have continuity through the bind button when I push it. I have continuity through the 1 and 2 switches when they are set to on. Setting is 2 on and 1 off according to the manual and I have that correct. Nothing seems loose and there is no corrosion at all. Don't know what else I could check without a circuit diagram..... which I am unable to find, of course. As I said, it worked great previously but it seems to have perished along the line while sitting in the Tx. Strange......


All times are GMT +1. The time now is 05:44 PM.

Powered by: vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.06800 seconds with 7 queries