WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   Batteries & Chargers (https://www.wattflyer.com/forums/forumdisplay.php?f=6)
-   -   Charging Setup (https://www.wattflyer.com/forums/showthread.php?t=37678)

05 ProStock 08-07-2008 06:17 AM

Charging Setup
 
I hate to be a noobie, but I have this charger-

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKSY1

this balancer-

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMGS7

and 3 cell lipos.

How do I charge them? Do I fully charge the batteries through the deans and then balance them, or do I charge/balance simultaneously?

and most of all, how?
It would be great if someone could show the setup in Paint.

Thanks in advance!

Dorsal 08-07-2008 07:22 PM

If you charge thru the balancer, it will automatically balance the cells. You will need to be connected to the balancer plug on the battery, NOT the Deans plug, for balancing. Then follow the instructions on the Equinox to get it into the "Interface" mode for charging (press the button twice in succession).
DO NOT try to charge the battery with both the Deans and the balancer plug connected to the charger source. Maybe I'll get a chance to draw a goofy sketch later.


All times are GMT +1. The time now is 11:14 PM.

Powered by: vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.03936 seconds with 9 queries