WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   3D Flying (https://www.wattflyer.com/forums/forumdisplay.php?f=5)
-   -   fliton edge 540 mini arf (https://www.wattflyer.com/forums/showthread.php?t=40003)

bolts 10-12-2008 09:14 PM

fliton edge 540 mini arf
 
Ok, I just ordered a fliton edge mini after reading the many positive threads about it.

Now I will need to get some servos, esc, motor and batteries.


Most of the threads are a couple of years old now so any advice on what to get would be greatly appreciated.

This will be my first electric plane and all out 3d capability is the goal.:)

I will very likely go with the recommended motor, and esc... unless someone can suggest otherwise?

Is anyone familiar with any of these products?

http://www.dealextreme.com/details.dx/sku.12830

http://www.dealextreme.com/details.dx/sku.11981

http://www.dealextreme.com/details.dx/sku.12821

http://www.dealextreme.com/details.dx/sku.12823

http://www.dealextreme.com/details.dx/sku.12859

The prices are good but I would pay more for something tried tested and true.

Would those servos be quick enough?

I also have an extremeflight 45" edge 540T on the way.

Can I can get an ESC that would also work for the bigger motor that I will need for the 45" edge?

Also ran into this http://www.dealextreme.com/details.dx/sku.10782 might be worth trying out.

Is anyone here currently flying a fliton edge?

Thanks in advance

John


All times are GMT +1. The time now is 09:19 AM.

Powered by: vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.06385 seconds with 7 queries