View Single Post
Old 10-25-2010, 12:26 AM
  #29  
A.T.
Member
 
Join Date: Mar 2006
Location: New Zealand
Posts: 123
Default Hitec RCD AFHSS - HTS-Voice Telemetry Voice Announcing System

Further to Post #28, pictures now available.

Hitec - New Products Ihobby Oct 2010 - Display Photos, includes Telemetry & Voice Communication System.
Yes, Talks To You, (ear/headphone socket also) and reads off your telemetry info so
you don't have to look at the screen.


Part No: 55841 :



Designed to fit on the handle of all Hitec radios, this system audibly provides telemetry data via speakers or earphones.
  • Audible Telemetry Information Readout via Speaker or Earphone
  • Selectable Information Readout
  • Volume Adjustable
  • 3.5mm Earphone Port
  • Power LED Indicator
  • Operates on 2 AAA Batteries
  • Designed to fit with on Handle of all Hitec Radios
  • Connects via lead to Data Port of the Spectra Module. (enables use with all other transmitters using the Spectra/Optima combination.)
. HTS-Voice Telemetry Voice Announcing System - Hitec homepage.

. HTS-Voice Telemetry Voice Announcing System - Manual - .jpg x 2 attached.
[Right click attachments and open in new window. Button bottom right of screen enables
viewing size increase upto 400% + 125% < + 150% provides easier reading.]

14th December 2010
Q. "+1 on the voice thing. Telemetry is great but, it is difficult looking at the Tx while in
flight. What data does the voice thing announce?
How often does it announce the data? Is it "data selectable" and if so all of the data or specific data?"

A. "Sorry no demo yet. Basically you can set it to read off all of the telemetry info in
sequence every 10 second, 30 seconds, or 1 minute; or select the specific readings
you want to hear in the same time frame. -Mike"


Q. "Mike any chance in pushing or influencing a pair of Sunglasses with OSD (on screen
display) so that the telem read out still allows line of site use? This would not be in
violation of speculated regs."

A. Absolutely, the idea has already been floated but there are a few more
things on the master list first. .It will come one day in the not so distant
future... of that I have no doubt! - Mike

17 August 2011: "Here's a recent video from when Model Airplane News
came to town and we went out and flew the new Multiplex Dog Fighter
with the SS-Blue Telemetry and HTS-Voice.- Mike"
http://www.modelairplanenews.com/videos/

18 December 2011: Firmware Update.
. Refer HTS-Voice on manufacturer's support forum regarding update to firmware due Feb 2012..

. HTS-Voice - Feedback on current features whilst awaiting update due Feb12:
"HTS_voice unit does spit out all the telemetry data, with a sad north American accent.
I'm using it together with a BLUE sensor station.
It will tell you the receiver or SPC voltage, (depending which one you are using), height,
speed, voltage again but this time from the separate sensor, and then current, followed
by the temperatures of the sensors (up to 4), if used.

It repeats this every 10 or 30 seconds depending on selection you made in the setup..
The firmware in the voice unit is certainly not finalised as it will not give you the receiver
or SPC voltage unless a sensor station is plugged into the receiver. It also has some
bugs with the GPS height, as on the transmitter, the height is shown correctly but the
voice unit add's some random height to it."



23 Feb 2012: Update
"Note that Hitec USA has not released the Voice system to the market
but plan to start shipping them shortly as the new V1.12 software is now complete.
. finally! Here's a couple screen shots: - Mike".

05 March 2012:
HPP-22 program file V1.12(0) now available. (pictorial "How To")
To enter HTS-Voice programming mode:
1. Whilst connected to TX & Spectra Module, switch on the TX.
2. Unplug HTS-Voice from module, refer attached sequence.

31 March 2012
Voice relative altitude - Addendum to HTS-Voice manual:
To read out relative altitude and not actual.
When it is speaking the altitude (on the ground,) push the function button it will reset the altitude to zero.

18 January 2013:
HPP-22 V1.14(0) - New Firmware - update procedure.
1. HTS-VOICE Firmware update and Set up can be upgraded by HPP-22.
2. Firmware update for HTS-VOICE (Ver.1.04(0))!!
- HTS-Advance sensor voice.

Additional notes:
1. The start messages is "your current aircraft status is"
and the end message is "end of report"
2. To enter the HTS-voice function mode, the transmitter has to be turned OFF.
Then turn on the unit, by holding the function button towards the back of the unit.
After five second the blue LED should light and the voice will prompt you through the set up.
... Follow the voice prompts.

Product Downloads
HTS-Voice Set-Up Manual
HTS-Voice Firmware Update Manual

ex Hitec USA Support Forum Sticky:
Aurora 9, AFHSS Spectra Modules, Optima Transceivers, Minima Receivers
& Telemetry
- FAQ & Undocumented Features
- Mixes, Setups, Tips. {Individual Links often updated}

Alan T.
Alan's Hobby, Model & RC FAQ Web Links
Attached Thumbnails Click image for larger version

Name:	Voice Telemetry.jpg
Views:	480
Size:	13.6 KB
ID:	140561   Click image for larger version

Name:	voice 01.jpg
Views:	495
Size:	110.2 KB
ID:	157549   Click image for larger version

Name:	voice 02.jpg
Views:	438
Size:	105.4 KB
ID:	157550   Click image for larger version

Name:	HTS-Voice Connect 1.jpg
Views:	429
Size:	38.7 KB
ID:	157926   Click image for larger version

Name:	HTS-Voice Connect.2.jpg
Views:	429
Size:	40.2 KB
ID:	157927  

Click image for larger version

Name:	HTS-Voice Connect 3.jpg
Views:	296
Size:	41.2 KB
ID:	157928   Click image for larger version

Name:	HTS-Voice Connect 4.jpg
Views:	318
Size:	38.9 KB
ID:	157929   Click image for larger version

Name:	HTS-Voice Manual_01.jpg
Views:	317
Size:	121.5 KB
ID:	162770   Click image for larger version

Name:	HTS-Voice Manual_02.jpg
Views:	314
Size:	119.6 KB
ID:	162771  

Last edited by A.T.; 05-31-2013 at 10:30 PM. Reason: update an url
A.T. is offline  
 
Page generated in 0.06915 seconds with 16 queries