View Single Post
Old 12-13-2012, 02:12 AM   #12
Join Date: Jul 2012
Location: British Columbia Canada
Posts: 21
Thanked 1 Time in 1 Post
Club: Just the clubhouse for drinks!!
iTrader: (0)
Friends: (0)
Default PZ Motor Upgrade

Ok; been away for a bit; I picked up an E-flite Power 15 which mounted perfectly into the PZ Spitfire. Changed out the 30 amp esc to a 40 amp esc.

Now I am up against it. PROPELLORS.

The stock PZ prop 9.5X7.5 only uses 16.4 amps/152.8 watts.

I tried a spare 11X7 and this prop only uses17.6 amps/162.7 watts

The power 15 is good for up to 42 amps max burst and 425 watts.

With these two props the esc pulses and is not happy.

I was using a 2600ma 3 cell 25c.
And i have a 2250 4 cell i might try out.

I can only have the prop so long due to ground clearance.

Looking for any ideas on props to try, even a three bladed prop.

needlenoses is offline  
  Reply With Quote
Page generated in 0.03756 seconds with 17 queries