View Single Post
Old 06-18-2014, 04:01 PM   #1
Child of the 60s
Davethebluessinger's Avatar
Join Date: Sep 2010
Location: Rugeley, Staffordshire, UK
Posts: 1,078
View Davethebluessinger's Gallery4
Thanked 18 Times in 16 Posts
Club: None
iTrader: (0)
Friends: (9)
Default Best way to power separate BEC?

Just sent for this BEC for use in a Pushycat running a 4S 3700.

Itís major overkill as there are only 2 full sized servos in the plane but it was pretty cheap and I thought it had a built in contingency in case I needed it in the future.
My question is:
Whatís the best method of supplying power to this?
Tap into the balance lead on the main LIPO or connect it to dedicated battery pack (was going to use a 3S 800mah I already have).
All advice gratefully received folks!

HK Mini Spirit, Flying Wings Mini Raven, FT Versa Wing, HK WingWing, Yuneec Q500, RCTimer 450 Spider, Eflite 200QX, Eflite UM Habu, Eflite Sport Cub, Eflite Whipit, HK Phoenix 2000, Dogfighter SPAD, Stryker F27Q
Davethebluessinger is offline  
  Reply With Quote
Page generated in 0.03619 seconds with 16 queries