WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - HK RX3S Receiver/Gyro on off problem with DX7
Old 11-10-2013, 10:19 PM
  #2  
hillbille
Super Contributor
 
hillbille's Avatar
 
Join Date: May 2007
Location: Barstow, California
Posts: 1,054
Default

Change the throws - AUX2 DOES control the AUX on the receiver, but it is a 3 position switch, so you need to make ONE of the positions read 0% and either of the others to read 150%. The 0% should be where the switch will be when you want the GYRO off, AND should NOT be set when the battery is first plugged in and the gyro is initializing.

Hillbille
hillbille is offline  
 
Page generated in 0.05001 seconds with 10 queries