View Single Post
Old 11-21-2009, 03:59 AM
  #8  
CHELLIE
Super Contributor
 
CHELLIE's Avatar
 
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 19,269
Default

Hi Jedorme See, Lots of Sharp people here that are willing to help out the newbe you can also just use a y connector for the ailerons, if your just going to use the ailerons and no flap mixing with them, Also do yourself a Great Big Favor Use Berg receivers with FM, they are the best of the best and dont cost anymore than other receivers, its like having a 2.4 radio system, as the Berg receivers will lock onto your transmitter, all i use are Jr transmitters and berg receivers, and I am Glitch Free I have 2.4 radios too, but i like the JR Transmitter with a berg receiver much better, less to go wrong and better range, IMHO, hope that helps, Chellie

i like the berg 4L receiver for smaller planes, also, only use berg crystals.
http://www.thefind.com/instruments/b...annel-receiver

Transmitter Signal Recognition (TSR) process:
The receiver "learns" the characteristics and specific signal signatures of your transmitter when you power it up. After that, the receiver will only listen to your transmitter*.
Note: If a similar transmitter on the same channel is powered up and is CLOSERto your receiver than your own transmitter, loss of signal/fail safe may be experienced.

http://www.castlecreations.com/suppo...user_guide.pdf
CHELLIE is offline  
 
Page generated in 0.05318 seconds with 10 queries