View Single Post
Old 10-07-2020, 05:28 PM
  #3  
jangodog
Member
 
jangodog's Avatar
 
Join Date: Feb 2019
Location: Odense Denmark
Posts: 120
Default

Not sure i connected them properly first time around. But they still doesn't work so maybe i short circuit them and
now they don't work`? I'll try setting up a "power system" on the bench with esc, retracts and rx, lipo and see if
that would work
jangodog is offline  
 
Page generated in 0.07091 seconds with 7 queries