View Single Post
Old 03-28-2010, 06:54 PM
  #39  
cjshaker
Member
 
Join Date: Jan 2007
Posts: 28
Default Repairing foam models

I really like to use polyurethane glue and water for repairing foam models. It's easy to fill in holes in the foam. First, use blue painters tape to make any forms needed to keep the foaming glue contained until it sets up. Fill the hole partway with polyurethane glue, then spritz it with water. The glue will foam up and expand.

I've started using polyurethane glue instead of foamsafe on my depron foamies as well. It seems much less brittle than foam safe CA.

Chris Shaker
cjshaker is offline  
 
Page generated in 0.04273 seconds with 8 queries