WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - New F27-C Stryker (Advice Please!!)
View Single Post
Old 10-01-2007, 09:44 PM
  #3  
DetroitHawk
Super Awesome
 
DetroitHawk's Avatar
 
Join Date: May 2006
Location: Detroit
Posts: 1,160
Default

Welcome to wattflyer rc_flyboy1!!!!


you came to the right place for help with questions like this. Feel free to ask about anything you have in question in the future also.


However,
I disagree with blue man, don't remove the servos. Center the trim and unhook the servo arm to the control horn, by turning it clockwise or counter clockwise it will adjust the length of the control arm and correct the problem.

Both of the elevons should be level with the bottom side of the stryker body. If you have to adjust the trim in flight i suggust you center it when you land and go thru the previous step again until no trim adjustment is needed.


You will find the stryker C is a very easy plane to fly, it will coast very slow and land with ease, it is one of my favrote planes that i have in my hanger.


GL lets us know how your maiden flight goes.
DetroitHawk is offline  
 
Page generated in 0.02997 seconds with 10 queries