WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - Micro Yak18" is Born
View Single Post
Old 12-22-2009, 07:55 AM
  #8  
tallflyer
Robert V
 
tallflyer's Avatar
 
Join Date: Oct 2005
Location: San Diego
Posts: 552
Default Parts list

Here is a complete parts list of whats on the plane

1 x GS 3G Motor And ESC Combo $59.00

This micro motor is the updated motor for the Raptor GS plane. The motor weighs a mere 3.1 grams with the wires. These also come with a 7A ESC presoldered to it which adds 2.5g of weight!

These motors were hand picked for this project and provide the best power for the small weight. We recommend a 2 cell 110 mAh battery to run with this. The receiver comes with a micro JST connector.


1 x EP5030 HD Propeller $1.20 each

1 x 7.4V 100 mAh 15C Li-Poly Battery $14.00


3 x Blue Arrow 2.5 gr Micro Servo, JST servos cost $14 each

* Torque: 2.78oz
* Speed: 0.13 sec/60
* Plug: JST/1.25mm
* Wire Length: 80mm(3.15in)/11x0.08/OD0.6
* Weight: 3.21g(0.11oz) including wire,and screw
* Size: 19.6mmx8.5mmx21.9mm (0.77inx0.33inx0.86in)

AR6300 DSM2 Nanolite 6-Channel Receiver

When it comes to lightweight 3D foamies and indoor slow flyers, every ounce you can eliminate means better performance and longer flight times. Weighing in at a scant 2 grams, Spektrums AR6300 with 2.4GHz DSM2 technology is the perfect receiver for these types of applications. $49.99
tallflyer is offline  
 
Page generated in 0.02845 seconds with 10 queries