WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - Fixing connectors to the motor help
View Single Post
Old 09-25-2011, 09:51 PM
  #2  
JetPlaneFlyer
Super Contributor
 
JetPlaneFlyer's Avatar
 
Join Date: Mar 2009
Location: Aberdeen, Scotland
Posts: 6,121
Default

You need some male bullet connectors, they come in different sizes so without more info i cant say exactly what you need, most likely they will be 3.5mm, if you can measure the diameter of the male part of the connectors on your existing motor that will confirm.
One of the best places to get stuff in the UK is Giant Cod: http://www.giantcod.co.uk/gold-bulle...-p-405126.html
You can get heatshrink at Giant Cod too (5mm).

A good 'how to' guide for soldering bullet connectors is on this page: http://www.innov8tivedesigns.com/#PS
JetPlaneFlyer is offline  
 
Page generated in 0.04875 seconds with 10 queries