WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - ELERC Micro A-10 Warthog 30mm EDF Beta Test
Old 10-05-2011, 07:57 PM
  #9  
Joe 1320
Super Contributor
 
Joe 1320's Avatar
 
Join Date: Feb 2006
Location: Sebring, Florida
Posts: 1,140
Default

Originally Posted by vh2q View Post
I was thinking the bell could protrude from the front end of the nacelles...

and isn't there a type of esc specifically made to drive 2 motors? My problem is I already have 2 35mm fans sitting here that I bought with an A-10 in mind. May go the stick built route.
The single esc only works well with brushed motors. You can probably run the two 35mm fans, just keep in mind that the inlet bells will esentially be about the same overall size as the nacelles. If you look at the pics of the front of the nacelles in my review, picture adding 2.5mm to the bell all the way around and you'll see that it will be a tight fit. You can do it with some patience. You'll still need to run twin escs, but there are recessed areas inside the nacelles for those.
Joe 1320 is offline  
 
Page generated in 0.02818 seconds with 8 queries