This might be a bit of a cheat but excluding the rx.
2805 motor......£4.58
10A ESC .........£5.50
7x4 prop ........£0.63
prop adapter....£0.74
servo lead ......£0.91
delivery .........£2.60
3x 3.7g servo..£5.25 inc delivery
2mm Depron...£2.99 collected from LMS
UHU POR........£2.99...as above
U/C wire.........£1.45...as above
Paint..............£1.98 collected from local DIY store
______
Total £29.68
or
$46.21
Plus a small bit of 0.8 mm sheet balsa, some salvaged clear plastic sheet from packaging, 3 paper clips and of course quite a number of hours!
Is there any bonus for how much
under $50 the foam and U/C is?
