View Single Post
Old 01-07-2009, 05:03 AM
Registered User
Twmaster's Avatar
Join Date: Aug 2005
Location: Dallas, TX, USA
Posts: 6,632

This is one of the most un-fun parts of setting up an airplane.

It sounds like you need to recenter your control linkages.

Remove the linkage from the servo. Remove the servo arm place the servo arm at neutral. Put control linkage back on the bird and center the control surface. Do this for both sides.

That should fix it.

If not, take two aspirin and call us in the morning.
Twmaster is offline  
Page generated in 0.08122 seconds with 8 queries