View Single Post
Old 01-08-2009, 12:33 AM
  #8  
xuzme720
c'mere Monkey
 
xuzme720's Avatar
 
Join Date: Apr 2007
Location: Just North of Houston.Heard of Dayton? I didn't think so...
Posts: 2,906
Default

Originally Posted by meesier42 View Post
As far as the menus go
Menu 1) D/R &Expo
Menu 2) Travel Adjust

to get symmetrical movement, I have the following settings,
in D/R&Expo, 60% + 40% on the aileron, no changes in the travel adj
I think what is happening is you need to set both the aileron channel and whatever aux channel the second aileron servo is plugged into to the identical settings for travel adjustments. It almost looks looks like you had dual rate set up on just one servo...

I guess the easiest way to explain dual rates is this: when D/R switch is off, full travel is selected. when D/R is on, only the percentage is available. If you select 50%, half of full travel will happen while D/R switch is on.
xuzme720 is offline  
 
Page generated in 0.08584 seconds with 8 queries