Old 09-02-2013, 04:23 PM
  #20  
quorneng
Super Contributor
 
quorneng's Avatar
 
Join Date: Jul 2008
Location: Cheshire, UK
Posts: 1,942
Default

This might be a bit of a cheat but excluding the rx.

2805 motor......4.58
10A ESC .........5.50
7x4 prop ........0.63
prop adapter....0.74
servo lead ......0.91
delivery .........2.60
3x 3.7g servo..5.25 inc delivery
2mm Depron...2.99 collected from LMS
UHU POR........2.99...as above
U/C wire.........1.45...as above
Paint..............1.98 collected from local DIY store
______
Total 29.68
or $46.21

Plus a small bit of 0.8 mm sheet balsa, some salvaged clear plastic sheet from packaging, 3 paper clips and of course quite a number of hours!

Is there any bonus for how much under $50 the foam and U/C is?
quorneng is online now  
 
Page generated in 0.08699 seconds with 7 queries