View Single Post
Old 03-25-2013, 06:10 PM
Super Contributor
fhhuber's Avatar
Join Date: Mar 2013
Posts: 4,786

You can insert a bent aircraft plywood "bow" in the indent for the canopy frame

2 layers of 1/64 ply bent into the frame area. Glue the first in with RC56 canopy glue. then glue the second in with yellow wood glue.

Make patterns from paper to ensure a good fit... so you don't waste plywood.

Weight added is very small. If you think your canopy is weak, go ahead and do it.

One sheet (12 in X 24 in) of this plywood will come in handy for other projects too.
fhhuber is offline  
Page generated in 0.07832 seconds with 10 queries