View Single Post
Old 09-18-2020, 11:39 AM
homo ludens modelisticus
ron_van_sommeren's Avatar
Join Date: Jul 2005
Location: near Nijmegen, Nederland
Posts: 1,330

(UBEC is just a propriatery brand name, zero information in it, I prefer LBEC (linear) and switching SBEC (switching), gives more info.)

Don't use a linear LBEC above 3s.
The higher the power-pack voltage, the fewer servos a non-switching = linear BEC can handle. Switching BEC's hardly have this restriction.
The higher the battery voltage, the hotter a linear BEC will get, for a given current/load/servos.
Or, in other words ...
The higher the battery voltage, the lower the current a linear BEC can supply.

In depth:
ron_van_sommeren is offline  
Page generated in 0.05865 seconds with 8 queries