View Single Post
Old 01-06-2010, 03:53 AM
New Member
Join Date: Dec 2009
Posts: 11

OK due to the excellent input from this thread, I will assume the power is close to battery voltage (ESC input) times the measured current. The RPM cannot predict motor voltage when loaded with a prop. However, it can determine speed (RPM X Pitch /1056).

In this case I am getting about 425 W to the motor; apparently still underpowered at 7 lbs weight. Sorry for the dual subject on this thread but the whole reason I bought the tach today was to try and get an idea of these parameters before I flew it.
alaursen is offline  
Page generated in 0.05721 seconds with 10 queries