WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - Use of Phantom 3 Standard to produce FPV / Camera MR
Old 07-31-2017, 07:48 AM
Super Contributor
solentlife's Avatar
Join Date: Oct 2010
Location: Ex UK Brit now in Latvia west coast - Ventspils
Posts: 12,395

Interesting .... Banggood dies seem to be a good source ....

There's also a combo camera / tx on Hobby King at about $30 ... which I hear may be cheap but works quite well.

I have a 9xr and FlySky module / Rx unused at moment - so that's earmarked for this.

Pal of mine has a spare set of goggles with built in auto-scan Rx .... so initial costs are low. Once I test - then I decide which way to go.

One idea I did have - was to actually repair the P3S .... then add lightweight FPV separate camera / tx .. the P3S can carry it easily. But then this would be an expensive route - but I would regain the HD video recording .....

solentlife is offline  
Page generated in 0.05061 seconds with 10 queries