WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - Hitec x2 700 Charger
View Single Post
Old 07-18-2018, 12:33 AM
  #1  
GordonC
New Member
 
Join Date: Jul 2018
Posts: 2
Default Hitec x2 700 Charger

I have a Hitec x2 700 two port charge and have been unable to use the Hitec “ChargeMaster” software (either v2.02 v2.03) to update the charger’s firmware. The PC software communicates with the charger but the “update” function does not respond and the windows listing updates are blank. The charger firmware is version 1.02 and I understand that 1.06 firmware exists.

Has anyone been through this and can offer advice or confirmation that the ChargeMaster s/w update function will work? I am wondering if the firmware needs to be downloaded in addition to the PC s/w, but can’t find a location on the Hitec website that shows charger firmware.
GordonC is offline  
 
Page generated in 0.03092 seconds with 9 queries