WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - XXL Polaris scratch build
View Single Post
Old 07-01-2009, 11:44 PM
Fviking's Avatar
Join Date: Apr 2009
Location: Newtown, CT. USA
Posts: 64
Default Bouncing boat

Hi Chellie;
Lovely to hear from you.
The goal for that boat was 50mph, it has trim tabs set just right, and on that run the strut was very close to perfect. I can get it to settle down, but at the cost of speed, the more boat in the water the more drag the slower it goes. Basically all I want in the water is the prop and the rudder and perhaps a tiny bit of the hull by the transom to keep it straight.
I made 49.4mph on another run, fall was upon us and testing stopped.
Fviking is offline  
Page generated in 0.04759 seconds with 8 queries