Old 08-11-2012, 05:05 AM
  #3  
Bill G
Super Contrubutor
 
Bill G's Avatar
 
Join Date: Oct 2005
Location: West Central PA
Posts: 4,422
Default

Thanks Joe

The wing construction is currently underway. It's always interesting to attempt to pre-cut an entire wing kit of parts for a modified design, and see if you can get every single notch correct. The wing is not exactly to plan, with the wingtips and ailerons being completely different from the plan. I also had an interesting time installing the tail wheel pushrod s-bend into the steering arm, using a pair of tweezers inserted through the stringers. Managed to flex the pushrod wire and get it in there, without breaking anything.
Attached Thumbnails Click image for larger version

Name:	Heston_Phoenix_11.5.jpg
Views:	315
Size:	59.2 KB
ID:	161861   Click image for larger version

Name:	Heston_Phoenix_12.jpg
Views:	356
Size:	54.3 KB
ID:	161862   Click image for larger version

Name:	Heston_Phoenix_13.jpg
Views:	338
Size:	44.3 KB
ID:	161863  
Bill G is offline  
 
Page generated in 0.06535 seconds with 12 queries