WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - Wing Dragon/Wing Dragon 4/Begin-Air Series Planes Tips & Tricks
Old 04-12-2017, 11:43 PM
Tree Landing Specialist
Join Date: Aug 2011
Location: Michigan
Posts: 5

Originally Posted by quorneng View Post
The power is going to depend on the motor, battery and speed controller combination that is fitted.
950 kV is much too low for a 7" prop. I use a 1500 kV Emax 2812 with a 1500 mAh 3s. It draws 17A which gives 170W.

The basic fuselage design is restricted to a 7" prop which limits the maximum power that can be used. There are modifications possible to mount the motor higher to allow bigger props.
I have a couple of these motors - it's a higher kV rating, how do you think it would do with their suggested props?
omster is offline  
Page generated in 0.02878 seconds with 8 queries