WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - Great Planes Fokker Dr-1 ARF : Did I bite off more than I can chew?
Old 09-08-2010, 03:50 AM
  #49  
brutus251
"nin caca da manga"
 
brutus251's Avatar
 
Join Date: Oct 2008
Location: Rhode Island
Posts: 135
Default

What you have to do is pull one wire up to the access hole,pull it thru the hole and tape it to the outside of the wing,then pull the other side thru to the access hole then pull that one thru. Then hook both wires up to the y connector and just push the excess wire up into the wing so there is only the lead from the y connector left to plug into the receiver. I dont have the plane in front of me so I dont know how long the connector has to be.Ideally you want just the wire from the y connector sticking out from the wing but as I said I dont know how long the one you have is.Its no big deal if the other extensions hang out too but it looks sloppy and will add drag.Brutus
brutus251 is offline  
 
Page generated in 0.04973 seconds with 10 queries