View Single Post
Old 09-07-2020, 03:31 PM
  #2  
quorneng
Super Contributor
 
quorneng's Avatar
 
Join Date: Jul 2008
Location: Cheshire, UK
Posts: 1,970
Default

Provided the grain goes the right way 3 x 1/8" 3 ply will be stiffer than one 3/8" 7 ply.
3 x 1/8 should have 6 laminations with the grain across the joint. 7 ply will only have 4.
Of course this does assume your glue is as good as that used by the ply manufacturer!
quorneng is offline  
 
Page generated in 0.07374 seconds with 8 queries