View Single Post
Old 09-17-2020, 10:05 PM
  #2  
pmullen503
Super Contributor
 
Join Date: Mar 2011
Location: Fond du Lac, WI
Posts: 1,030
Default

Generally, if you have ESC with BEC circuits you should remove one red lead if they are switching type BECs. Smaller (up to 3s) ESCs can have linear BECs which are less problematic. A linear BEC is just a glorified resistor to drop the voltage and parallel circuits like these are common. It doesn't hurt to remove one red wire even if they are linear BECs.
pmullen503 is offline  
 
Page generated in 0.06998 seconds with 8 queries