I'm also putting together a Multiplex Funjet... i'm learning to test out the electronics before installing them. I just pluged everything together an ran a 1/2 throttle test for 30 sec with no prop and my motor is getting hot... the esc and batt are cool, any ideas why?
This is what i'm using:
Motor: PKZ4216 1880Kv (it's the F27C Stryker stock motor)
ESC: 35 AMP
Battery: 3S 1000mAh 30C (same result on a 3300mAh 3S 20C)
P.S. When i add the prop, both the motor and the ESC are getting hot???
Last edited by jap71173; 04-22-2011 at 09:36 PM.