Old 12-06-2011, 05:30 AM
prof_fate's Avatar
Join Date: Oct 2011
Location: Beaver, PA
Posts: 235

Originally Posted by CNY_Dave View Post
I have never measured mine, have only flown with a DX5e.

Anything over 100% with a DX6 or better on the ailerons (and maybe on the other controls) can result in jamming, the linear servos don't like to see any overtravel.

Not true.
There are 2 adjustments on on a DX6i - travel adjustment - up to 125% each direction and yes, these can cause jamming if you go too far.
But under D/R Expo you have D/R - the dual rate - and here you set a percentage from 0-100 that is a percentage of total travel. So you can set these to say, 50%, and then the servo will only move 50% of it's total available range.
prof_fate is offline  
Page generated in 0.06200 seconds with 8 queries