Old 12-06-2011, 07:58 AM
  #19  
solentlife
Super Contributor
 
solentlife's Avatar
 
Join Date: Oct 2010
Location: Ex UK Brit now in Latvia west coast - Ventspils
Posts: 12,787
Default

Originally Posted by prof_fate View Post
Not true.
There are 2 adjustments on on a DX6i - travel adjustment - up to 125% each direction and yes, these can cause jamming if you go too far.
But under D/R Expo you have D/R - the dual rate - and here you set a percentage from 0-100 that is a percentage of total travel. So you can set these to say, 50%, and then the servo will only move 50% of it's total available range.
The time that most radios will jam after altering settings is when mixing ch's and having travel settings too high ...

It's not uncommon on flaperons for example to reduce each command set to 50% so that when they add together as in when aileron + flap command is issued - the surface does not overtravel the 100% total.
solentlife is online now  
 
Page generated in 0.06386 seconds with 10 queries