View Single Post
Old 11-01-2015, 08:43 PM
  #2  
road king 97
old hat
 
road king 97's Avatar
 
Join Date: Nov 2010
Location: joliet il
Posts: 3,105
Default

Originally Posted by dereckbc View Post
OK I have been using Robert Shaw 30-minute Epoxy and not happy with it as it is too brittle when dried and cured. It is somewhat pliable at room temps and higher. But today is our first cool day down here in TX. It is a very chilly 58 degrees this morning. I went out to the garage this morning to work on my plane when I made a shocking discovery. A few days ago I mixed up some Epoxy for a model I am working on, and still had the wax paper I used to mix the last batch. So to tidy up I went to throw it away, and as soon as I picked up the paper to wad it up, the glue literally exploded and shattered into a hundred pieces with almost no effort, It is as fragile as very thin glass like glass used to make Xmas tree globes.

So does anyone know where one can find some good pliable epoxy that does not turn to glass in cool weather?
The only time i have seen this happen if its old epoxy . I have used different brands from local hobby shops and craft stores with a good succes so far. joe
road king 97 is offline  
 
Page generated in 0.06878 seconds with 8 queries