View Single Post
Old 11-02-2015, 05:37 PM
  #11  
Rodneh
Member
 
Join Date: Oct 2005
Location: Florida, USA
Posts: 753
Default

I have been using many brands of epoxy for years and I have never found any difference in hardness caused by temperature variation on cureing. Now this means within most environmental temperatures. Get it to hot (where it bubbles or boils and you can have problems, to cold and it will not cure). Brittleness is almost always caused by an improper proportion during mix. Heat , within reason, will only effect the rate of cure with hotter curing faster.
Rodneh is offline  
 
Page generated in 0.06498 seconds with 8 queries