Thread: Forsale Almost PNP blade 400 3D
View Single Post
Old 01-24-2009, 06:40 PM
  #1  
helidude22
New Member
 
Join Date: Jan 2009
Posts: 10
Thumbs up Almost PNP blade 400 3D

Item is sold!!
This is a used blade 400 3D. It comes with the esc, motor, and the stock servos, many extra parts, an 1800mah battery, a 2100mah battery, the stock charger and an wall plug adapter cord. All you need to complete the set is a transmitter, receiver, and gyro. I have only ran about 30 batteries through it.

Extras:
2100mah battery
Wall plug adapter cord

Replacement parts:
1. landing Gear skid set
2. washout control arms
3. horizontal fin stabilizer mount
4. bell mixer arm pushrod set
5. bearings 5x10x4mm
6. landing skid
7. flybar paddles
8. bell mixer pushrod
9. elevator control lever set
10. flybar paddle control frame
11. linkage pushrod set
12. tail rotor shaft
13. head block/rotor housing
14. main shafts
15. spindle/feathering shaft
15. hex wrenched, screws, etc.
16. bind plug

ALL THIS FOR $240!!
Will trade for a t-rex 250.
Go here for pics http://sites.google.com/site/bladecpupgrades/contact-me

Last edited by helidude22; 02-05-2009 at 06:32 AM. Reason: Item Is sold!
helidude22 is offline  
 
Page generated in 0.08234 seconds with 9 queries