Sport Planes (Formerly I/C & Gas Conversion) Discuss I/C or Gas Conversions, Aerobatic Planes and Sport Aircraft

AG-1 Agrivator

Old 03-29-2010, 12:27 PM
Thread Starter
rea59's Avatar
Join Date: Jul 2006
Location: Midway Kentucky
Posts: 1,228
Default AG-1 Agrivator

Made this last year from rolled up plans I ordered through the AMA plans service.
It's supposed to be a 1970s crop duster. The plans were for a Glow motor but I converted it to electric during the build.

Using a Power25 motor with a 4S2p 4000mah battery (2p because I needed all that weight up front, along with some lead).

Maiden flight was this past Saturday using a 12X6 APC prop. I was surprised considering the weight of this plane (around 6lbs) how quickly it left the ground. Winds were running over 10mph but this plane didn't even notice. I did have to keep the throttle up quite a ways to keep the speed up. Then again I had the wind helping one way and subtracting the other. Very, very smooth flying and slows down on landing great. (with a 10mph headwind you can land almost like a Harrier)

Nicked the prop on my 3rd landing so I going to try an 11X8 APC and remove 1oz from the nose and see what that does to it.
Attached Thumbnails Click image for larger version

Name:	ag1%20agrivator.jpg
Views:	251
Size:	15.5 KB
ID:	124248  
rea59 is offline  
Old 03-29-2010, 12:33 PM
Thread Starter
rea59's Avatar
Join Date: Jul 2006
Location: Midway Kentucky
Posts: 1,228

This thing is all solid sheeted on the fuse, even the tail feathers are solid 3/8" thick. Power seems good, although I'll be tweeking for awhile.
Still need to find a good pilot for it too.
I am still just amazed at how easy this thing flew. No trimming, just smooth flying.
rea59 is offline  
Old 03-29-2010, 03:57 PM
Community Moderator
firemanbill's Avatar
Join Date: Sep 2005
Location: Sevierville, Tennessee
Posts: 20,619

Nice looking bird you have there Ray!
firemanbill is offline  
Old 04-08-2010, 05:10 PM
Super Contributor
Join Date: Oct 2005
Posts: 1,071

Good looking model you found there Ray. Reminds me lots of my dear old Four Star 40 in layout - would it be around 60" span, by any chance? My 4* started out north of 6lbs with 20 nicad cells pulling around 30A - a little more power than you have, but not much, and she left a lot of folk who thought electrics couldn't actually fly thinking maybe they were wrong.

So you have built yourself a good sports model that should give you great flying for a long while. If you fancy a little improvement, there's still plenty of us around who have modified good flying glow models to equally well flying electrics and can recall how to alter frameworks. That 3/8" sheet tailplane would be right out the window for one

FWIW - my Four Star started with props barely larger than it would have flown on as a glow model - around 11". She ended up with a geared inrunner turning a 15 x 10 at a mere 7000RPM and was way better than with the small props, in all respects. Your model might be even more fun if you fit a larger motor, keep your 4S and use a larger prop / same sort of wattage / current at lower RPM.

There's a lot of good looking models in those magazine plans ranges.


Dereck is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.07238 seconds with 16 queries