Show your Heads Up RC Set Up
01-18-2009, 08:34 PM
#1
Super Contributor
Thread Starter
Join Date: Dec 2006
Location: Tulsa
Posts: 5,687
Show your Heads Up RC Set Up
I'm starting this thread to share your different planes and set ups using gear from Heads Up RC. I have several but I'll start with my most recent.
I'm putting a 2410-9 on a Hobby Lobby Yak. I changed out to a stick mount on the Yak because that's just how I roll
. 18amp esc with a 3S 1000mah lipo. Just put it on this morning so I haven't had a chance to fly it yet.
I'm putting a 2410-9 on a Hobby Lobby Yak. I changed out to a stick mount on the Yak because that's just how I roll
. 18amp esc with a 3S 1000mah lipo. Just put it on this morning so I haven't had a chance to fly it yet.
01-18-2009, 08:48 PM
#2
Super Contributor
Join Date: Aug 2006
Location: Shadeville Fl,
Posts: 7,189
Near Every plane I got in the last year's got something from Jeff in it!! I quit HC an shop only here ( GWS props for Planes though) Figue'in shipp'in an low price'in make my choice a no-brainer, And service To Boot! bub, steve
01-18-2009, 08:49 PM
#3
HeadsUp RC.com
Join Date: Jan 2007
Posts: 112
Originally Posted by smokejohnson
I'm starting this thread to share your different planes and set ups using gear from Heads Up RC. I have several but I'll start with my most recent.
I'm putting a 2410-9 on a Hobby Lobby Yak. I changed out to a stick mount on the Yak because that's just how I roll. 18amp esc with a 3S 1000mah lipo. Just put it on this morning so I haven't had a chance to fly it yet.
I'm putting a 2410-9 on a Hobby Lobby Yak. I changed out to a stick mount on the Yak because that's just how I roll
. 18amp esc with a 3S 1000mah lipo. Just put it on this morning so I haven't had a chance to fly it yet.
01-18-2009, 09:30 PM
#5
Super Contributor
Thread Starter
Join Date: Dec 2006
Location: Tulsa
Posts: 5,687
Here's how I like to set up my combat planes with a 2408-21. It's a tough mount. Here's a step by step of how I do it.
http://www.wattflyer.com/forums/showthread.php?t=31473
http://www.wattflyer.com/forums/showthread.php?t=31473
01-18-2009, 09:59 PM
#7
HeadsUp RC.com
Join Date: Jan 2007
Posts: 112
Originally Posted by smokejohnson
Here's how I like to set up my combat planes with a 2408-21. It's a tough mount. Here's a step by step of how I do it.
http://www.wattflyer.com/forums/showthread.php?t=31473
http://www.wattflyer.com/forums/showthread.php?t=31473
01-18-2009, 10:10 PM
#10
Super Contributor
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 19,264
here is my 9mm Depron scratch built fun jet with a 2408-21 and a 7x6 sf prop 30 amp esc and a 1300mah 3 cell lipo 20-30C, the motor is from Heads Up Rc 
[media]http://www.youtube.com/watch?v=WLLQM7cXseM[/media]
[media]http://www.youtube.com/watch?v=WLLQM7cXseM[/media]
01-18-2009, 10:13 PM
#11
Super Contributor
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 19,264
Build around the 2408-21
here are a few planes that fly great with the 2408-21
http://www.wattflyer.com/forums/showthread.php?t=40096
http://www.wattflyer.com/forums/showthread.php?t=40096
01-19-2009, 01:48 AM
#12
Super Contributor
Join Date: Aug 2006
Location: Shadeville Fl,
Posts: 7,189
Originally Posted by all_up_in_the_air
Lots of nice looking models. I hope they fly as good as they look 
01-19-2009, 04:37 AM
#15
Super Contributor
Join Date: Aug 2006
Location: Shadeville Fl,
Posts: 7,189
Originally Posted by Grasshopper
I kind of like that Me-109.
01-27-2009, 02:24 PM
#16
Super Contributor
Thread Starter
Join Date: Dec 2006
Location: Tulsa
Posts: 5,687
2805-28
Bought one of these to try on a scratchbuilt F-22 I'm working on. I had to use my Dremel tool with a sanding drum to take a little off the flange to get it to sit down in the GWS mount correctly. Then I made a plastic disk from a bowl to attach the flange to the mount. I also used a cut off wheel to shorten the shaft so the prop adapter sits closer to the bell.
01-27-2009, 03:33 PM
#17
Friend Across the Water
Join Date: Apr 2006
Location: Columbia, SC
Posts: 2,109
P-40F is all www.headsuprc.com outfitted with exception of RX (removed from my SE-5a). Motor is TP 2409-12T, ESC is 32 Amp, and battery is 1650 mAh 20C LiPo. Haven't maidened yet, but good weather is on the way. I can't tell where I purchased the four 9 gram servos from as I have been sworn to secrecy by the originator of this thread.
I can't tell where I purchased the four 9 gram servos from as I have been sworn to secrecy by the originator of this thread.
01-27-2009, 06:50 PM
#18
Super Contributor
Join Date: Aug 2006
Location: Shadeville Fl,
Posts: 7,189
Originally Posted by Voyager2lcats
P-40F is all www.headsuprc.com outfitted with exception of RX (removed from my SE-5a). Motor is TP 2409-12T, ESC is 32 Amp, and battery is 1650 mAh 20C LiPo. Haven't maidened yet, but good weather is on the way. I can't tell where I purchased the four 9 gram servos from as I have been sworn to secrecy by the originator of this thread.
I can't tell where I purchased the four 9 gram servos from as I have been sworn to secrecy by the originator of this thread.! bub, steve
01-27-2009, 08:13 PM
#19
Friend Across the Water
Join Date: Apr 2006
Location: Columbia, SC
Posts: 2,109
SteveBub, I guess she flies pretty nicely on that. Hah, hah. I've got a 9050 HD prop on mine.
Hah, hah. I've got a 9050 HD prop on mine.
Originally Posted by stevecooper
Thats near the same as my spit! (cept my ESC's a 30) & 9 grammers,all from Jeff,, And I can tell you is DON'T use a EP or slow fly prop as it's too much for um, use a ridged prop! AND HOLD ON!!!!!!!!!!!!!!mines 18 OZ with 32OZ of thrust!! bub, steve
! bub, steve
01-27-2009, 09:57 PM
#20
Member
Join Date: Jan 2009
Location: Formerly Chicago,Now Huntley,Il
Posts: 329
This is what Jeff recommended for the SC I'm building.
2409-18T motor
20A ESC
GWS 1060 prop
SG90 servos
11.1v 1650 20C Lipo battery
He also included the following pic's for a motor mount idea.
OH,, And did I mention VERY Fast $2.00 shipping.
How can you beat service like that?
2409-18T motor
20A ESC
GWS 1060 prop
SG90 servos
11.1v 1650 20C Lipo battery
He also included the following pic's for a motor mount idea.
OH,, And did I mention VERY Fast $2.00 shipping.
How can you beat service like that?
01-27-2009, 11:38 PM
#21
Super Contributor
Thread Starter
Join Date: Dec 2006
Location: Tulsa
Posts: 5,687
Originally Posted by Voyager2lcats
P-40F is all www.headsuprc.com outfitted with exception of RX (removed from my SE-5a). Motor is TP 2409-12T, ESC is 32 Amp, and battery is 1650 mAh 20C LiPo. Haven't maidened yet, but good weather is on the way. I can't tell where I purchased the four 9 gram servos from as I have been sworn to secrecy by the originator of this thread.
I can't tell where I purchased the four 9 gram servos from as I have been sworn to secrecy by the originator of this thread.
Originally Posted by stevecooper
Thats near the same as my spit! (cept my ESC's a 30) & 9 grammers,all from Jeff,, And I can tell you is DON'T use a EP or slow fly prop as it's too much for um, use a ridged prop! AND HOLD ON!!!!!!!!!!!!!!mines 18 OZ with 32OZ of thrust!! bub, steve
! bub, steve.
01-28-2009, 02:05 AM
#22
Super Contributor
Join Date: Aug 2006
Location: Shadeville Fl,
Posts: 7,189
Originally Posted by smokejohnson
Yep I used the same set up on my P-40, I think I was using an 1800mah 3S. My plane weighed around 24 ounces and I had plenty of power. Not enough for unlimited vertical but enough vertical to put a big smile on your face .
.
01-29-2009, 01:45 AM
#24
aint crashin aint flyin
Join Date: Aug 2008
Location: the flying field
Posts: 823
http://www.headsuprc.com/servlet/the...ushless/Detail
http://www.headsuprc.com/servlet/the...1300mah/Detail
these two are on my reach whirlwind. I was thinking about this motor http://www.headsuprc.com/servlet/the...lectric/Detail for my t-28 with a heads up 40 amp esc.
http://www.headsuprc.com/servlet/the...1300mah/Detail
these two are on my reach whirlwind. I was thinking about this motor http://www.headsuprc.com/servlet/the...lectric/Detail for my t-28 with a heads up 40 amp esc.
01-29-2009, 03:31 AM
#25
Passed on
Join Date: Jan 2006
Location: Mid Coastal TX.
Posts: 2,100
Originally Posted by benovisoff
Hi John B.! how did I know you are reading this? Of course you know my heads up rc setup, after all, you mailed it to me! HAHAHAHEHEHEHEHOHOHOHOHo
Of course you know my heads up rc setup, after all, you mailed it to me! HAHAHAHEHEHEHEHOHOHOHOHoYes I'm looking around here
Checking out all of the "Jeff Equipped" planes
Wondering if I have enough space on here to show all my Heads Up RC equipped planes. I really need to put them in my Gallery Space but...
Standing By,
SJ
