Wattflyer RC Network: RC Universe :: RCU Magazine :: RCU Forums :: RCU Classifieds :: RCU User Reviews :: RCU YouTube
Home Who's Online Calendar Today's Posts RealTime Post Spy Mark Forums Read
Go Back   WattFlyer RC Electric Flight Forums - Discuss radio control eflight > Electric R/C Airplanes > Electric Ducted Fan Jets
Register Members List Wattflyer Extras Articles Search Today's Posts Mark Forums Read Social Groups

Electric Ducted Fan Jets Discuss electric ducted fan jets here including setup tips, power systems, flying techniques, etc.

Thank you for your support (hide ads)
Reply
 
Thread Tools Display Modes
Old 02-11-2018, 11:46 PM   #1
Ed Waldrep
Member
 
Ed Waldrep's Avatar
 
Join Date: Feb 2006
Location: Las Vegas, NV
Posts: 79
Thanked 1 Time in 1 Post
iTrader: (0)
Friends: (0)
Default T-33 EDF kit available 42.25" span 37" length laser-cut lite-ply and balsa

I'm finally ready to offer for sale my own-design scale laser-cut balsa and lite-ply retractable landing gear ready T-33 kit for sale after 3 months (well, 18 years in a way) of development. This 42 1/4"( 1073mm) span and 37"(940mm) long 55mm to 68mm Electric Ducted Fan radio controlled model jet kit is laser cut from lite-ply and balsa (around 21 laser-cut sheets total) and comes with a vacuum formed canopy, a full sized wing plan, 50% side view plan, full size wing sheeting patterns, exhaust tube and cardstock inlet ducting patterns, 2 page parts layout guide, dvd-r with a PDF instruction manual with pictures, over 400 construction photos and a few videos. The fuselage cross-section and inlet size are scale. The fuselage is built with the “half shell” method, layed on it’s side on a ceiling tile and held in place with pins, over a crutch that aligns the bulkheads, and is partially sheeted with three laser-cut sheets (near the intake and over the wing) and the rest is strip-planked with 3/32" balsa strips. The laser cut parts include all the items to build the fuselage and wings except for a couple of 1/8” balsa stringers and the 1/16” balsa wing sheeting (patterns provided) and the round parts of the inlet ducting (patterns provided). Parts to construct a rounded sanding block that matches the curve of the main part of the fuselage are supplied, this makes sanding the fuselage planks smooth much easier. The inlet ducting is constructed of cardstock/cereal or donut box/100 lb Bristol paper (Michaels craft store), with the inlet walls comprised of laser cut 1/16 balsa sheet. Retractable landing gear mounts are designed in from the start, with the Airpower RA-260 Micro air retracts used as the base equipment (there may be electric retracts that small but I don’t know of any at the moment). This version hasn't flown yet but I'm confident it will, a hand cut version flew in 2007 and this is the same design but without washout (washout can be built in by placing scrap wood under the rear of the building tabs, say 1/16" under R1A, then two layers of 1/16 under the building tab of R2, three layers under R3, and so on. The stall on T-33s can be quite vicious, tip stalling, but I wanted to try the no washout wing first and add NASA dropped leading edgess if necessary, they were used on the 90mm sized model and tamed the stall somewhat.

Here's a link to the thread on RCGroups where I spend most of my time, there's further info and photos of the airplane. https://www.rcgroups.com/forums/show...e#post39097079

Update on retract choices: I just found some electric retracts at hobbyking that would work in this thing, just from a quick glance. They are not too tall (19mm of height where the retract unit sits, these are 16mm tall) and I think they'll fit between the wing ribs, and best of all, the strut retracts AWAY from the unit and the mechanism is on the other end of the retract, so it doesn't get in the way of the tire retracting and you could have a scale strut length and ground stance. Cool, may have to order some of these. https://hobbyking.com/en_us/turnigy-...E&gclsrc=aw.ds
SKU number is 107000158

Earlier versions of this design, which dates back to the year 2000, have flown successfully. A larger glass fuselage version flew in 2005 (the aluminum taped airplane pic is below, fiberglass fuselage short kit is available) and a same size balsa version build by a modeler in New York flew many times via hand launch in 2007. Pictures of those follow, the new version, which has scale-sized inlets, is nearing completion. Laser-cut parts that interlock to some degree make building and alignment much easier and quicker!
For pricing and information on ordering, email me at
[email protected]
or PM me at RCGROUPS username Ed Waldrep

There's some previous discussion of this and the upcoming 90mm glass version in this thread I started a few months ago:
https://www.rcgroups.com/forums/show...s#post38418750


Attached Images
File Type: jpg WP_20180208_02_22_46_Pro.jpg (733.3 KB, 164 views)
File Type: jpg WP_20171108_02_27_40_Pro T33Mini build 2017 (2).jpg (361.6 KB, 153 views)
File Type: jpg WP_20171124_21_17_31_Pro.jpg (482.8 KB, 151 views)
File Type: jpg WP_20171126_14_28_51_Pro.jpg (612.4 KB, 157 views)
File Type: jpg WP_20171129_02_00_55_Pro.jpg (649.6 KB, 144 views)
File Type: jpg WP_20180208_02_22_56_Pro.jpg (872.5 KB, 149 views)
File Type: jpg WP_20171215_20_09_25_Pro.jpg (500.9 KB, 151 views)
File Type: jpg T-33 midi at AZ Jets 2005 tege.jpg (69.4 KB, 138 views)

"Put the spurs to her Chuck!" - Jack Ridley to Chuck Yeager, from The Right Stuff.
Ed Waldrep is offline  
  Reply With Quote
Old 02-20-2018, 11:39 PM   #2
Ed Waldrep
Member
 
Ed Waldrep's Avatar
 
Join Date: Feb 2006
Location: Las Vegas, NV
Posts: 79
Thanked 1 Time in 1 Post
iTrader: (0)
Friends: (0)
Default

I've been making progress with the paint scheme. Kits are available, laser cut balsa and ply, 37 inches long, 42" span, 55 to 68mm fans, retracts are designed in from the start. As you can see she builds nice, a bit of work but really cool when you're done.


Attached Images
File Type: jpg T33 laser 20 feb 2018 garage 5-11-03 cropped.jpg (606.3 KB, 142 views)
File Type: jpg WP_20180220_05_03_07_Pro.jpg (529.4 KB, 129 views)
File Type: jpg WP_20180220_05_03_18_Pro.jpg (768.5 KB, 131 views)
File Type: jpg WP_20180220_04_45_12_Pro.jpg (592.0 KB, 132 views)

"Put the spurs to her Chuck!" - Jack Ridley to Chuck Yeager, from The Right Stuff.
Ed Waldrep is offline  
  Reply With Quote
Reply

  WattFlyer RC Electric Flight Forums - Discuss radio control eflight > Electric R/C Airplanes > Electric Ducted Fan Jets


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:34 PM.


Powered by: vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2005 WattfFlyer.com
RCU Eflight HQ

Charities we support Select: Yorkie Rescue  ::  Crohn's & Colitis Foundation



Page generated in 0.11343 seconds with 34 queries