juliantkp

Hi !
I just overloaded my newly bought (3 days ) Hitec Micro 05s Rx, wanted to replace the part my self, but the component burned and I can't read the parts number, can anyone that has Micro 05, snap a close up photo of the circuitry (front + back) so i can know what parts are they? particularly component near the pin out put (I believe is capacitor).
THNX!!

I also killed my ESC haha, but forgot the brand name. It is the ESC burned that burned my Rx. I believe only the regulator on the ESC burn, whic can be replace, but I forgot what is the brand (left it in office).

THNX!!!

Best Regards!

Bruce Abbott

This is the HFS05MS (40MHz version), but most of the parts are the same. The input filter cap is only rated for 6V, so it is the most likely victim if your BEC went over-voltage.

juliantkp

Thanks for the help!

We look into it .. anyway I've bought new receiver and also a Spectrum 6CH

Regards,
JLT

TbigD

Send it to Hitec , they will fix it for free , and ship back for free also...Dennis

j4ck4

Thnx
Got it soldered back to the connection shown.